Summary of common Canon printer errors and how to handle them

Summary of common canon printer errors and how to handle them. Today, individual users and especially organizations or companies owning a handy modern compact printer is no longer a big deal but is becoming very normal. Among the brands chosen by consumers, Canon is the brand that is most used, in the course of use inevitably will appear errors that if you pay attention and learn information, you can completely by yourself. fix without having to bring it to the store or have a repairman come home for repair. Below is a summary of common canon printer error and error table and how to proceed Canon printer.

Summary of common Canon printer errors and how to handle them
Summary of common Canon printer errors and how to handle them

The green light stays still, the orange light flashes: (The number attached is an error that appears on your computer)

2 times: no paper or no CDs or DVDs

3 times: Paper jam (1300), duplex printing gear error (1303) or newspaper door switch switch being closed (1250)

4 times: running out of ink in the jar (1600): refill the ink and press the Resume / Cancel button

– Never installed ink (1660) or installed ink cartridges but have not been contacted (if exposed, the lights must be red)

5 times: without printhead installed (1401)

– high temperature print head sensor (1403)

– EEFPROM printhead error (1405)

6 times: printing paper but opening the disc tray (1841,1846,1851,1856,1850,1855)

7 times: C, M, Y, BK, and PGBK chips are mixed (1681,1680)

8 times: warning of waste toner overflow (1700). Press the Resume / Cancel key to continue printing or enter the service mode to clear the waste toner.

9 times: Camera or camcorder attached to the printer does not support Camera Direct Printing (2001)

10 times: Duplex function has problem with back side data (1310). Press the Resume / Cancel key to continue printing.

11 times: the printhead does not automatically align (2500). Press the Resume / Cancel key to exit the error, then enter the printer control on the computer to run Print Head Alignment again in the Maintenance Tab.

13 times: there is an ink tank that is missing ink (1683). Turn on the device, refill the bottle with the red light flashing, close the device, press and hold the Resume / Cancel key for 5 seconds, then remove your hand.

14 times: have an ink tank does not accept (1684) (cleaning chip contact of ink tanks).

15 times: Many ink bottles do not recognize (from 1410 to 1419) as the same error.

Error codes orange and green lights flashing alternately.

You wait for the green light to stop and start counting, for every orange light to blink, green light to blink once:

2 times: Carriage cluster error (5100)

3 times: error of paper pulling axis (6000) (it is a long shaft, not a paper roller) can be caused by dirty motor or sensor or film disc at the end of the shaft.

4 times: Sensor cam at faulty pump assembly (5C00)

5 times: Sensor cam pulls the paper in the upper tray error (5700)

6 times: The temperature on the main is too high (5400) due to the component on the main board being burnt.

7 times: Full waste toner (5B00). Entering service mode clears waste.

8 times: The print head temperature is too high (5200)

9 times: EEPROM ic error (6800)

11 times: The print head assembly cannot determine the coordinates when moving (5110).

12 times: Error of paper pulling part (6A00)

13 times: error of paper pulling motor (6B00)

14 times: Sensor error does not receive a paper when the motor has pulled the paper (6B10).

15 times: The computer still powers the printer via USB (9000)

16 times: Sensor suction pump ink defective.

17 times: Malfunction of main motor control (6D00)

19 times: turn on the device while opening the cover, light enters so the device cannot read the lights on the ink tanks (turn off the device, darken the device and then turn on the power)

20 times: because the print head is short, causing the mainboard to be short (this disease only has to replace the new mainboard) (6500)

Orange and green lights blinking continuously without rules: ROM error

The orange light flashes but does not flash: RAM error

Error message and how to handle Canon iP3680 / 4680 printer

Error message and how to handle Canon iP3680 / 4680 printer canon ip3680 printer Error and how to handle Canon iP3680 / 4680 printer Blue light stands still, orange light flashes: (figure attached is an error that appears on the machine ) Error message and how to handle Canon iP3680 / 4680 printer

The green light stays still, the orange light flashes: (The number attached is an error that appears on your computer)

2 times: (1000) The machine has no paper in the back tray

(1001) Insert the CD / DVD disc tray into the machine

(1002) No CD / DVD in the tray yet

(1003) The machine does not have paper in the Cassette tray in the chassis

insert paper (CD / DVD or disc tray) into the machine, press the Resume / Cancel key to print

3 times: (1300) Paper jams in the machine

(1303) Could not pull the paper on the rear tray

(1304) Do not pull the paper on the chassis tray

(1250) The door is closed

4 times: (1600) One of the cloves ran out of ink

(1660) The toner cartridge has not been inserted into the machine, or the ink tank chip feet have not been contacted

5 times: (1401) The printer has not been installed, the head is not in contact or the print head is not in the right category

(1403) The print head temperature is too high

(1405) The printhead chip has lost data

6 times: (1841,1846,1851,1856) The CD / DVD tray door is open

(1850,1855) The CD / DVD tray is incorrectly set

(1830) The CD / DVD printing function for more than 12 minutes has not been available since the print job

Press the Resume / Cancel key to clear the error

7 times: (1681) There are many cloves of the same color in the machine

(1680) Incorrect placement of ink in the machine

8 times: (1700,1701) Warning device for overflowing waste (also called land out). The error “The ink absorber becomes almost full” may soon appear on the computer

Press the Resume / Cancel key to clear the error

9 times: (2001) Camera or digital camera attached to the printer does not support direct printing

10 times 1310) The length of the paper being printed does not support duplex printing. This error appears after printing all sides 1

11 times: (2500) Printer function Printhead alignment failed

13 times: (1683) One of the ink tanks is out of ink

If you use squid shrimp, replace the ink shrimp, the printer will tell you all. If you use the ink tank continuously, open the upper door of the machine to run the printhead assembly.

– Close all the buttons on the refill kit so that the ink does not drop

– Lift the blinking squid, and then press the old position again

– Close the door and wait for the machine to report the error of 13 orange lights, then press and hold the Resume / Cancel key for 5 seconds or more until the machine stops reporting the error, then release

– Repeat the above operations until the error message is out

14 times (1684) one of the squid contact was not good

15 times (from 1410 to 1419)

Check and clean the chip pins, if not all, remove the machine to clean the base to contact the chips

16 times (1688) The printer ran out of ink while printing was in progress

Press and hold the Resume / Cancel key for 5 seconds to resume printing with an empty toner

19 times (2002) The device does not support the cable that is attached to the PictBridge port (there are two drops of water opposite the USB port on the computer)

Error codes orange and green lights flashing alternately.

You wait for the green light to stop and start counting, for every orange light to blink, green light to blink once:

2 times: (5100) Error of print head assembly (Carriage) due to the following reasons:

– Film is dirty

– Stumble paper

– Turn on the squid

– Cut the connecting cable

– Failure of Carriage assembly or Curoa rope pulling motor

– Cut or slip Curoa rope

Hope the above information will help you!

Most views

Leave a Reply

Your email address will not be published. Required fields are marked *