Fix Install Realtek HD Audio Driver Failure, Error OxC0000374 on Windows 10. If you try to install the necessary drivers for the Realtek sound card and receive an error message – Install Realtek HD Audio Driver Failure, Error OxC0000374 , then this post will help you.
In this post, Quantrimang.com will help you identify possible causes of errors, as well as provide appropriate solutions to troubleshoot.
When the driver installation fails, you will receive the following error message:
Install Realtek HD Audio Driver Failure !! [Error Code : OxC0000374]
This problem can occur in a number of situations and is likely to stem from many causes.
However, there are cases when this problem occurs due to sound card failure. This situation cannot be overcome through a software solution and you have to replace the sound card. You should see no errors and the unknown device has an exclamation point or a yellow question mark in Device Manager . Windows 10 will not allow you to install drivers when the hardware device is broken.
There is no solution in this article that helps in this case.
If you encounter the Install Realtek HD Audio Driver Failure error on Windows 10, you can try the suggested solutions below and see if that helps resolve the issue.
Note : Before you jump right into the solutions below, you should run SFC and DISM scans to fix the corrupted files.
Table of Contents
1. Re-enable the sound card driver
It is possible to install a corrupted driver. In that case, you will need to reset the driver installation and see if that fixes the error.
If restarting the driver doesn’t fix the problem, continue with the next solution.
2. Check the damaged sound card driver and update it manually
If Windows 10 doesn’t allow you to install drivers, this solution requires you to try updating them from Device Manager.
Here’s how:
Press Win + X key to open Power User Menu .
Press M on the keyboard to open Device Manager.
From inside the Device Manager window , expand the menus and find the Sound driver .
Check if they have exclamation marks or question marks ahead.
Right-click on the driver with an exclamation mark or question mark and select Update Driver from the menu.
Follow the instructions and provide admin confirmation if necessary.
Reboot the device after the driver has finished installing.
When booting, you can check if the error has been resolved. If not, continue with the next solution.
3. Use the Add legacy hardware option in Device Manager
This solution only applies when Sound, video, and game controllers are lost in Device Manager.
To use the Add legacy hardware option in Device Manager , follow the instructions in the instructions provided above in solution 1.
If the error persists, continue with the next solution.
4. Disable the Microsoft UAA Bus driver for HD audio
Because Realtek is the only audio driver that comes with the internal UAA driver installation, unlike drivers from Conexant od SoundMAX, you can disable the UAA bus and reinstall the driver. Assuming the conflict is with the UAA driver, removing it will let Realtek install itself properly, along with the UAA bus.
To turn off the Microsoft UAA Bus driver for HD audio, follow the instructions provided in solution 1.
