An error occurred during port configuration. While trying to configure the printer port on your Windows 10, you may encounter the error message: “An error occurred during port configuration”. In this post, we offer the most suitable solutions you can try to solve the problem.
![An error occurred during port configuration](https://ngolongtech.b-cdn.net/wp-content/uploads/2021/12/ngolongtech_An-error-occurred-during-port-configuration.png)
Table of Contents
What causes the error?
If you are experiencing ‘An error occurred while configuring Windows 10 Home port ‘ while trying to configure Printer Port in Windows 10/11 Home computer, then you have come to the right place for the solution. Here you will be guided through simple steps/methods to solve the problem. Let’s start the discussion.
‘Something happened while configuring the port’ error in Home windows: It is a common Home windows problem is related to Printer Port Configuration error. This error usually appears when you try to configure the printer port on your Windows 10 Home computer. This error prevents you from configuring or setting up the printer port in your computer for a number of reasons including a glitch in the printer menu , printer stuck in limbo (Operating system doesn’t know that it is ON), third party anti-virus software interference and others.
It is possible that third party antivirus software or Firewall installed in your computer is blocking access to the Printer Port Configuration Menu for some security reason or its too high security feature . You can fix the problem by disabling third-party anti-virus software in your computer. Also you can fix the ‘Printer stuck in limbo’ problem by resetting your printer to fix the ‘Error occurred while configuring port’ in your computer. Let’s go to the solution.
How to fix An error occurred during port configuration?
Method 1: Fix ‘An error occurred while configuring the port’ error with ‘PC Repair Tool’
If this error is caused by some problem in your Home windows computer, then you can try to fix the problem with ‘PC Repair Tool’. This software gives you the ability to find and fix BSOD errors, EXE errors, DLL errors, problems with programs, malware or virus problems, system files or registry problems, and system problems. system with just a few clicks. You can download this tool via the button/link below.
Method 2: Configure the Printer Port using the ‘Devices & Printers’ setting
One possible way to fix the problem is to configure the Printer Port from the classic Control Panel interface.
Step 1: Open ‘Management Panel’ in Home windows 10 through ‘Home windows Search Field’
Step 2: In the ‘Management Panel’ window, go to ‘{Hardware} and Sound > System & Printers’
Step 3: Find and right click on the printer device causing the error and select ‘Printer properties’
Step 4: In the ‘Properties’ window, click the ‘Ports’ tab, select your printer from the list of ports and press ‘Configure port…’
Step 5: Check if you can see the ‘Printer Port Configuration’ menu without any problem.
Method 3: Perform a factory reset of the printer
One possible way to fix the problem is to do a onerous reset of your Printer to fix the ‘Printer stuck in Limbo state (Operating system doesn’t know that printer is ON)’ as well as ‘Error happens during port configuration’ .
Step 1: Turn ON your printer if it is OFF and wait until the printer goes idle or wait for the boot process to complete
Step 2: Now, disconnect the power cord on the back of the printer and unplug the power cord from the electrical outlet
Step 4: Wait for 60 seconds and then, plug the power cord into an electrical outlet and reconnect the power cord to the back of your printer port
Step 5: Now, turn ON your printer and wait for it to go into idle mode. Once done, try to configure the printer ports in the Home windows computer and check if the error is resolved.
Method 4: Disable third-party firewall or anti-virus in Home windows computer
Sometimes, this error can occur due to the interference of the anti-virus program or the third-party firewall in the computer. It is possible that your third-party Firewall or anti-virus software is blocking access to the Printer Port configuration menu for some security reason or for security reasons. In this case, you can try to fix the problem by disabling the third-party anti-virus software installed in the computer. If disabling your anti-virus software doesn’t work for you, you can completely uninstall third-party antivirus software from your computer to solve the problem. After uninstalling, restart your computer and check if the error is resolved.
Method 5: Change the account type to Administrator
Sometimes this error can appear if you are trying to configure the Print Gateway from a non-admin account in your Windows 10 Home computer. You can try to change the standard user account to an Administrator account. to troubleshoot.
Step 1: Press the ‘Home windows + I’ key on your keyboard to open the ‘Settings’ app
Step 2: In the ‘Settings’ app, go to ‘Accounts > Family & other users’, find and click on your standard account and click the ‘Change account type’ button
Step 3: Select the ‘Admin’ option from the ‘Account Type’ drop-down menu and click ‘OK’ to save the changes. After that, restart your computer and check if the error is resolved.
Method 6: Manually discharge the print queue
Another possible way to fix the problem is to clear the print queue in Home windows computer.
Step 1: Press ‘Home windows + R’ key on your keyboard, type ‘companies.msc’ in the open ‘Run’ dialog and press the ‘OK’ button to open the ‘Services’ window
Step 2: Find and right click on the ‘Print Spooler’ service and select the ‘Cease’ option to stop the service
Step 3: Now, open ‘File Explorer’ and navigate to the following path
C: Home windows System32 spool PRINTERS
Step 4: Delete all the contents inside the ‘Printers’ folder that you navigated using ‘step 3’
Step 5: Now, go back to the ‘Services’ window using ‘step 1 and step 2’. Find and right click on the ‘Print Spooler’ service and select the ‘Restart’ option to restart it. Once done, try to configure the printer ports and check if it works.
Video – An error occurred during port configuration
Conclusion
Ngolongtech hopes this post has helped you on How to Fix the Error that occurred during Windows 10 Home portal configuration with some simple steps/methods. You can read and follow our instructions to do so. That is all. For any suggestions or questions, feel free to write in the comment box below.